(LC) Vertical Turbine Pump, Extensively Applied in Primary Water Treatment Plant

• Driving Type: Motor
• Material: Cast Iron
• Power: Electric
• Start Up: Electric Pump
• Application: Clarified Water Pump
• Capacity: 60~8400m3/H
• Model NO.: LC
• Head: 12.5~94.5m
• Medium Temperature: 0degree~+80degrees
• Transport Package: Export Wood Case
• Trademark: SUHUA
• Origin: China

Product Description

Performance Range:
Capacity: 60~8400m³ /h
Head: 12.5~94.5m
Medium temperature: 0degree~+80degrees

Application:
1. Pumping clean water, sea water, sewage containing solid particles, such as scrap iron, sand, coal powder and corrosive industrial sewage,
2. Extensively applied in primary water treatment plant, sewage treatment plant, metallurgy and iron-steel works(especially for delivering of oxgenation iron scrap water), power station, mine, municipal engineering and farmland irrigation.

Construction feature:
Type LC vertical long-shaft pump has single foundation, its inlet is vertical downward and outlet is horizontal. The pump and the motor are directly connected. The rotation of pump rotor is counter clockwise looking from the motor to the pump.
1. The impeller and other wearing parts have a long life because of anti-abrasive material and advanced hydraulic design adopted. The pump is not only reliable, safe, steady but also energy-saving.
2. There is filter in pump inlet with proper hole that not only prevent impurity entering pump to damage pump but also decrease inlet loss and increase pump efficiency.

3. Impeller adopts balance hole to balance axial force. There is replaceable seal ring in front and back cover board of impeller to protect impeller and pump.
4. Pump guide bearing adopts polytetrafluoroethylene or Thordon bearing, it can also adopt rubber (the temperature of liquid is over 55degrees). Shaft is protected by protective tube, the guide bearing should be supplied with exterior cooling lubricating water while delivering sewage.
5. The remaining axial force of pump and the weight of rotor parts are borne by thrust bearing in motor seat or motor with thrust bearing.
6. Pump shaft seal adopts packing seal, there is replaceable shaft sleeve in shaft seal and guide bearing to protect shaft.
7. Pump can be equipped with controller which can automatically start and stop pump according to liquid level, give an alarm for over loading and control many pumps in long-distance.

 

Type	Flow	Series	Head	Speed	Shaft power	Motor		Efficiency	Weight
						Power	Type
	m3/h		m	r/min	kW	kW		%	kg
100LC50 -20×x	50	1	20	2950	3.9	5.5	Y132S1-2	70	480+90N
		2	40		7.8	11	Y160M1-2		510+90N
		3	60		11.7	18.5	Y160L-2		540+90N
		4	80		15.6	22	Y180M-2		570+90N
		5	100		19.5	30	Y200L1-2		600+90N
		6	120		23.4	37	Y200L2-2		630+90N
		7	140		27.3	37	Y200L2-2		660+90N
150LC100 -18×x	100	1	18	2950	6.8	11	Y160M1-2	72	600+100N
		2	36		13.6	22	Y180M-2		630+100N
		3	54		20.4	30	Y200L1-2		660+100N
		4	72		27.3	37	Y200L2-2		690+100N
		5	90		34.1	45	Y225M-2		720+100N
		6	108		40.9	55	Y250M-2		750+100N
		7	126		47.7	75	Y280S-2		780+100N
		8	144		54.5	75	Y280S-2		810+100N
150LC140 -15×x	140	1	15	2950	7.8	11	Y160M1-2	73	600+100N
		2	30		15.7	22	Y180M-2		630+100N
		3	45		23.5	37	Y200L2-2		660+100N
		4	60		31.4	45	Y225M-2		690+100N
		5	75		39.2	55	Y250M-2		720+100N
		6	90		47.0	75	Y280S-2		750+100N
		7	105		54.9	75	Y280S-2		780+100N
		8	120		62.7	90	Y280M-2		810+100N
		9	135		70.6	90	Y280M-2		840+100N
150LC200 -20×x	200	1	20	2950	14.9	22	Y180M-2	73	720+150N
		2	40		29.9	45	Y225M-2		780+150N
		3	60		44.8	55	Y250M-2		860+150N
		4	80		59.7	75	Y280S-2		920+150N
		5	100		74.7	90	Y280M-2		980+150N
		6	120		89.6	110	Y315S-2		1040+150N
200LC-14.5	240 300 360		16.4 14.5 11.8	1480	14.5 15.6 17.4	22	Y180L-4	74.3 76 66.5	900+170N
200LC-19	240 300 360		21.3 19 15.4	1480	18.2 20.4 21.3	30	Y200L-4	76.6 76.2 70.7	900+170N
200LC-23	240 300 360		25.3 23 20.2	1480	21.6 24.7 28.1	37	Y225S-4	76.7 76.1 70.6	900+170N

 
 

Type	Flow		Head	Speed	Shaft power	Motor		Efficiency	Weight
						Power	Type
	m3/h	l/s	m	r/min	kW	kW		%	kg
200LC-14.5×2	240 300 360	66.7 83.3 100	32.8 29 23.6	1480	29 31.2 34.8	45	Y225M-4	74.3 76 66.5	1020+170N
200LC-19×2	240 300 360	66.7 83.3 100	42.6 38 30.8	1480	36.4 40.8 42.6	55	Y250M-4	76.6 76.2 70.7	1020+170N
200LC-23×2	240 300 360	66.7 83.33 100	50.6 46 40.4	1480	43.2 49.4 56.2	75	Y280S-4	76.7 76.1 70.6	1020+170N
200LC-19×3	240 300 360	66.7 83.33 100	63.9 57 46.2	1480	54.6 61.2 63.9	75	Y280S-4	76.6 76.2 70.7	1140+170N
200LC-23×3	240 300 360	66.7 83.3 100	75.9 69 60.6	1480	64.8 74.1 84.3	110	Y315S-4	76.7 76.1 70.6	1140+170N
200LC-23×4	240 300 360	66.7 83.3 100	100.8 92 81.6	1480	86.0 98.4 111.2	132	Y315M-4	76.7 76.1 70.6	1260+170N
250LC-21	360 450 540	100 125 150	23.1 21 18.2	1480	30.4 32.6 35.4	45	Y225M-4	74 79 75	1200+250N
250LC-21A	320 400 480	88.9 111.1 133.3	18.9 16.6 13.3	1480	21.7 23.5 26.2	37	Y225S-4	76 76.5 66	1200+250N
250LC-32	360 450 540	100 125 150	34.8 32 28.9	1480	44.4 50.6 56.8	75	Y280S-4	74.7 77.5 76.8	1280+250N
250LC-32A	320 400 480	88.9 111.1 133.3	30.7 28 24.9	1480	34.7 39.7 44.8	55	Y250M-4	76 77 72.7	1280+250N
250LC-21×2	360 450 540	100 125 150	46.2 42 36.4	1480	60.8 65.2 70.8	90	Y280M-4	74 79 75	1400+250N
250LC-32×2	360 450 540	100 125 150	69.6 64 57.8	1480	88.8 101.2 113.6	160	Y315L1-4	74.7 77.5 76.8	1500+250N
250LC-32A×2	320 400 480	88.9 111.1 133.3	61.4 56 49.8	1480	69.4 79.4 89.6	110	Y315S-4	76 77 72.7	1500+250N

 

Type	Flow			Head	Speed	Shaft power	Motor		Efficiency	Weight
							Power	Type
	m3/h		l/s	m	r/min	kW	kW		%	kg
250LC-32×3	360 450 540	100 125 150		104.4 96 86.7	1480	133.2 151.8 170.4	220	Y355M1-4	74.7 77.5 76.8	1720+250N
250LC-32A×3	320 400 480	88.9 111.1 133.3		92.1 84 74.7	1480	104.1 119.1 134.4	160	Y315L1-4	76 77 72.7	1500+250N
300LC-25	540 660 750	150 183.3 208.3		27.5 25 21.6	1480	54.7 56.6 58.9	75	Y280S-4	74 79.5 75	1340+270N
300LC-25A	490 600 680	136.1 166.8 188.9		22.8 21 17.9	1480	41.8 42.9 45.0	55	Y250M-4	73 79 74	1340+270N
300LC-39	540 660 750	150 183.3 208.3		43 39 35.6	1480	85.5 88.8 97.0	132	Y315M-4	74 79 75	1480+270N
300LC-39A	490 600 680	136.1 166.8 188.9		35.6 32 29.5	1480	65.3 67.8 74.1	110	Y315S-4	73 78 74	1480+270N
300LC-25×2	540 660 750	150 183.3 208.3		55 50 43.2	1480	109.4 113.1 117.7	160	Y315L1-4	74 79.5 75	1580+270N
300LC-39×2	540 660 750	150 183.3 208.3		86 78 71.2	1480	171.0 177.6 194.0	250	Y355M2-4	74 79 75	1780+270N
300LC-39A×2	490 600 680	136.1 166.8 188.9		71.2 65 59	1480	130.6 135.5 148.3	200	Y315L2-4	73 78 74	1780+270N
350LC-19	750 900 1050	208.3 250 291.7		22.2 19 16.1	1480	58.1 58.4 60.6	90	Y280M-4	78 81 76	1540+270N
350LC-19A	710 850 980	197.2 236.1 272.2		20 17 14.5	1480	49.8 50.7 51.5	75	Y280S-4	78 80 75	1540+270N
350LC-30	750 900 1050	208.3 250 291.7		33.5 30 25.5	1480	90.1 92.0 98.6	132	315M-4	76 80.5 74	1650+320N
350LC-30A	710 850 980	197.2 236.1 272.2		30.2 27 23	1480	78.2 80.5 85.7	110	Y315S-4	75 79 73	1650+320N