Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Registered Capital:
1500 RMB
Plant Area:
1001~2000 square meters
Management System Certification:
ISO 9001, ISO 9000
Average Lead Time:
Peak season lead time: 3-6 months
Off season lead time: 1-3 months

Vertical Turbine Pump, Vertical Mixed Flow Pump, Water Pump manufacturer / supplier in China, offering Vertical Mixed Flow Pump, Vertical Turbine Pump, Water Pump/Single-Stage Double-Suction Split Casing Centrifugal Pump, Vertical Turbine Pump for ISO9001 and so on.

Gold Member Since 2011
Audited Supplier
Supplier Homepage Products Vertical Turbine Pump Vertical Mixed Flow Pump, Vertical Turbine Pump
  • Vertical Mixed Flow Pump, Vertical Turbine Pump

Vertical Mixed Flow Pump, Vertical Turbine Pump

Min. Order / Reference FOB Price
1 Piece US $1-8,000/ Piece
Port: Shanghai, China
Payment Terms: L/C, T/T
Max.Head: 30-50m
Max.Capacity: 100-200 L/min
Driving Type: Motor
Impeller Number: Multistage Pump
Working Pressure: Low Pressure Pump
Influent Type of Impeller: Single Suction Pump

You Might Also Like


Basic Info.

Model NO.
Position of Pump Shaft
Vertical Pump
Performance Range:
Capacity: 2100~65000 m³ /h
Head: 5.7~42m
Medium temperature: 0degree~+55degree

1. Pumping clean water, rainwater, seawater and sewage.
2. Circulation pump in power plant,
3. Water supply and drainage for steel and iron plant, quay industry, city as well as irrigation.

Construction feature:
1. Installation mode
Single foundation: Pump and motor are installed on the same foundation with outlet above or below the foundation.
Double foundation: Pump and motor are installed respectively on their own foundations with outlet between these two foundations.
2. Pump can be classified into three types: Non-pullout, pullout and rotor type (with diffuser).
3. Pump impeller is classified into integral impeller and combined impeller.
4. The axial thrust of pump is borne by the anti-thrust bearing of motor or the thrust bearing of pump.
5. The pump bearing is rubber guide bearing (anti-abrasive, anti-corrosive and anti-seawater) and Thordon bearing. The pump shaft is usually equipped with protective tube in which clean pressure water will lubricate and clean the guide bearing. The flow of pressure water is controlled by capacity-relay to avoid damage to the bearing. When pump is used to deliver sewage or water with particles, the automatic-stall shaft seal device at the end of guide bearing in diffuser will prevent liquid entering the bearing after the stall.
6. Besides adopting anti-corrosive materials, the pump for delivering seawater is equipped with sacrificial anode and exterior power cathodal protection devices to prevent the pump parts from electrochemical corrosion.
7. The pump is driven by the motor through rigidity or flexible coupling.
8. There are two types of inlet: The usual bell-mouthed type and the modified ellipse frusta type.

Note: Materials of pump parts can be selected according to the features of pumping liquids.
This type of bearing and seal can be adapted according to customers' requirement~

Vertical Mixed Flow Pump, Vertical Turbine Pump

Send your message to this supplier

avatar Ms. Lingling

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like


Contact Supplier

Ms. Lingling